Professor John Wallace
     
 
Journal Papers

(43)      Orakcal, K.; Massone, L. M., and Wallace, J. W., “Shear Strength of Lightly Reinforced Wall Piers and Spandrels,” ACI Structural Journal, accepted, May 2008. 
(42)      Yu, E., Skolnik, D., Whang, D. H., and Wallace, J. W., “Forced-Vibration Testing of a Four Story RC Buildings Utilizing the NEES@UCLA Mobile Field Laboratory, “Earthquake Spectra,  accepted for publication, May 2007.
(41)      Kang, T. H-K.; Wallace, J. W., “Seismic Performance of Reinforced Concrete Slab-Column Connections with Thin-Plate Stirrups,” ACI Structural Journal, Vol. xxx, No y, pp. xxx – yyy, accepted for publication, November 2007.
(40)      Wallace, J. W., Elwood, K. J., “An Axial Load Capacity Model for Shear Critical RC Wall Piers,” Journal of Structural Engineering, ASCE, in-press, November 2007.
(39)      Wallace, J. W.,” Modeling Issues for Tall Reinforced Concrete Core Wall Buildings,” The Structural Design of Tall and Special Buildings, Wiley InterScience, 16, 615-632, December 2007. (2007 Best Paper Award)
(38)      Kang, T. H.-K., Wallace, J. W., “Stresses in Unbonded Tendons of Post-Tensioned Flat Plate Systems under Dynamic Excitation”, PTI Journal, Vol. 6, No. 1, pp. 31 – 44, February 2008. 
(37)      Kenneth J. Elwood, Adolfo B. Matamoros, John W. Wallace, Dawn E. Lehman, Jon A. Heintz, Andrew D. Mitchell, Mark A. Moore, Michael T. Valley, Laura N. Lowes, Craig D. Comartin, Jack P. Moehle, “Update to ASCE/SEI 41 Concrete Provisions,” Earthquake Spectra, Vol. 23, No. 3, pp. 493-523, August 2007.
(36)      Hueste, M. B. D., Browning, J., Lepage, A., Wallace, J. W., “Seismic Design Criteria for Slab-Column Connections,” ACI Structural Journal, Vol. 104, No 4, pp. 448 – 458, July – August 2007.
(35)      Tjhin, T., Aschheim, M.A., Wallace, J. W., “Yield Displacement-Based Design of RC Wall Buildings,” Engineering Structures, Vol. 29 (2007), Elsevier, in-press, Oct. 2006. 
(34)      Yu, E.; Wallace, J. W.; Taciroglu, E., “Parameter Identification of Framed Structures Using an Improved Finite Element Model Updating Method—Part II: Applications to Experimental Data,” Earthquake Engineering and Structural Dynamics, 36(5), pp. 641-660, April 2007.
(33)      Yu, E.; Taciroglu, E.; Wallace, J. W., “Parameter Identification of Framed Structures Using an Improved Finite Element Model Updating Method—Part I: Formulation & Validation,” Earthquake Engineering and Structural Dynamics, 36(5), pp. 619-639, April 2007.
(32)      Chun, Sung Chul; Lee, Sung Ho; Kang, Thomas H.-K.; Oh, Bohwan; and Wallace, John W., “Mechanical Anchorage in Exterior Beam-Column Joints Subjected to Cyclic Loading,” ACI Structural Journal, Vol. 104, No 1, pp. 102-113, January – February 2007.
(31)      Han, Sang Whan; Kee, Seong-Hun, Kang, Thomas H.-K.; Ha, Sang-Su; Wallace, John W.; and Lee, Li-Hyung, “Cyclic Behavior of Interior Joints in Post-Tensioned Flat Plate Slab Systems,” Magazine of Concrete Research, 58(1), December 2006.
(30)      Rha, C.; Taciroglu, E., Wallace, J. W., “Development of a nonlinear model of soil-structure interaction for CIDH bridge columns,” Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol. 132, No. 10,  pp. 1304 – 1324, October 2006.
(29)      Skolnik, D.; Ying, L.; Yu, E.; and Wallace, J. W., “Identification, Model Updating, and Response Prediction of an Instrumented 15-Story Steel Frame Building,” Earthquake Spectra, Vol. 22, No. 3, pp. 781 – 802, August 2006.
(28)      Kang, T. H-K.; Wallace, J. W., “Punching of Reinforced and Post-Tensioned Concrete Slab-Column Connections,” ACI Structural Journal, Vol. 103, No 4, pp. 531 – 540, July – August 2006.
(27)      Massone, L. M., Orakcal, K., Wallace, J. W., “Modeling flexural/shear interaction in RC walls, ACI-SP-236, Deformation Capacity and Shear Strength of Reinforced Concrete Members under Cyclic Loadings, American Concrete Institute, Farmington Hills, MI, Paper 7, pp. 127 – 150, May 2006
(26)      Janoyan, K., Stewart, J. P., Wallace, J. W. “Full Scale Cyclic Lateral Load Test of a Reinforced Concrete Shaft-Column,” ACI Structural Journal, Vol. 103, No. 2, pp. 178 – 187, March – April, 2006. 
(25)      Orakcal, K. and Wallace, J. W., “Flexural Modeling of Reinforced Concrete Walls – Model Calibration,” ACI Structural Journal, Vol. 103, No. 2, pp 196 – 206, March – April, 2006.
(24)      Kang, T. H-K.; Wallace, J. W., “Responses of flat plate systems subjected to simulated earthquake loading,” ACI Structural Journal, Vol. 102 , No. 5, pp. 763 – 773, Sept. – Oct. 2005. 
(23)      Yu, E.; Whang, D.; Conte, J. P.; Stewart, J. P.; Wallace, J. W., “Force-vibration of buildings using the linear shaker seismic simulation (LSSS) testing method,” Earthquake Engineering and Structural Dynamics, 34:7, pp. 737-761, June 2005.
(22)      Melek, M., Wallace, J. W., “Cyclic behavior of columns with short lap splices,” ACI Structural Journal, Vol. 101, No. 6, pp. 802 – 811, Nov. – Dec. 2004.
(21)      Orakcal, K., Conte, J. P., Wallace, J. W., “Flexural Modeling of Reinforced Concrete Walls – Model Attributes,” ACI Structural Journal, Vol. 101, No. 5, pp. 688 – 698, Sept. – Oct. 2004.
(20)      Thomsen IV, J. H. and Wallace, J. W, “Displacement-Based Design of Slender RC Structural Walls – Experimental Verification, J. Struct. Eng., ASCE, Vol. 130, No. 4, pp 618-630, April 2004.
(19)      Massone, L. M., Wallace, J. W., “Load – Deformation responses of Slender Reinforced Concrete Walls, ACI Structural Journal, Vol. 101, No. 1, Jan- Feb 2004, pp. 103 - 113.
(18)      Conte, J.P., Pandit, H., Stewart, J.P., and Wallace, J.W. (2003). "Ground motion intensity measures for performance-based earthquake engineering," Proceedings, 9th Int. Conf. on Applications of Statistics and Probability in Civil Engineering, A. Der Kiureghian, S. Madanat and J.M. Pestana (editors), Vol. 2, 1465-1472, Millpress.. 
(17)      Wallace, J. W.; Orakcal, K. (2002), “ACI 318-99 Provisions for Seismic Design of Structural Walls,” ACI Structural Journal, Vol. 99, No. 4, American Concrete Institute, pp. 499-508.
(16)      Wallace, J. W.; Eberhard, M. O.; Hwang, S.-J.; Moehle, J. P.; Post, T.; Roblee, C., Stewart, J. P., “921 Taiwan Earthquake – Performance of Bridges,” Earthquake Spectra, Supplement to Vol. 17, April 2001.
(15)      Wallace, J. W., “Behavior and Design of High-Strength RC Walls,” ACI Structural Journal, SP-176, American Concrete Institute, Farmington Hills, MI, pp. 259-279.
(14)      Wallace, J. W.; McConnell, S.W.; Gupta, P.; Cote, P. A., “Use of Headed Reinforcement In Beam-Column Joints Subjected to Earthquake Loads,” ACI Structural Journal, Vol. 95, No. 5, American Concrete Institute, pp. 590-606.
(13)      Taylor, C. P.; Cote, P. A.; Wallace, J. W., “Design of Slender RC Walls With Openings,” ACI Structural Journal, Vol. 95, No. 4, American Concrete Institute, pp. 420-433.
(12)   SlatonBarker, A. B.; and Wallace, J. W., “Nondestructive Testing of Bridge Decks Using Dual Frequency Radar,” ACI Structures Journal, SP-168, American Concrete Institute, Farmington Hills, MI, 1997, pp. 25-57.
(11)   Wight, J. K; Wood, S. L.; Moehle, J. P.; and Wallace, J. W., “On Design Requirements for Reinforced Concrete Structural Walls,” ACI Structures Journal, SP-162, American Concrete Institute, Farmington Hills, MI, 1996, pp. 431-456.
(10)   Wallace, J. W., “Evaluation of UBC-94 Provisions for Seismic Design of RC Structural Walls,” Earthquake Spectra, Vol. 12, No. 2, pp 327 – 348, May 1996.
(9)       Wallace, J. W.; Thomsen IV, J. H., “Seismic Design of RC Shear Walls; Part II: Applications,” J. Struct. Eng., ASCE, Vol. 121, No. 1, January 1995, pp.88-101.
(8)       Wallace, J. W., “Seismic Design of RC Shear Walls; Part I:  New Code Format,” J. Struct. Eng., ASCE, Vol. 121, No. 1, January 1995, pp.75-87.
(7)       Thomsen IV, J. H. and Wallace, J. W., “Lateral Load Behavior of  Reinforced Concrete Columns Constructed Using High-Strength Materials,” ACI Structural Journal, American Concrete Institute, Vol. 91, No. 5, pp.605-615, September-October 1994.
(6)       Wallace, J. W., “A New Methodology for Seismic Design of  Reinforced  Concrete  Shear Walls,” J. Struct. Eng., ASCE, Vol. 120, No. 3, March 1994, pp.863-884.
(5)       Wallace,  J. W.,  Moehle,  J. P., “An Evaluation of Ductility and Detailing Requirements  of  Bearing Wall Buildings Using Data from the 3 March 1985 Chile Earthquake,” Earthquake Spectra, Vol. 9, No. 1, Feb. 1993, pp.137-156.
(4)       Wallace, J. W., Moehle, J. P., “Ductility and Detailing Requirements of Bearing Wall Buildings,” J. Struct. Eng., ASCE, Vol. 118, No. 6, June 1992, pp.1625-1644.
(3)       Moehle,  J. P., Wallace, J. W., Hwang, S.-J., “Anchorage Lengths for Straight Bars in  Tension,” ACI Structural Journal, Vol. 88 No. 5, Sept.-Oct., 1991, pp.531-537.
(2)       Wallace, J. W., Moehle, J. P., “Evaluation of ATC Requirements for Soil-Structure Interaction Using Data from the 3 March 1985 Chile Earthquake,” Earthquake Spectra, Vol. 6, No. 3, August 1990, pp.593-611.
(1)       Melosh, R. J.; Araya, R.;  Farhat, C.; Garcelon, J.; Mora, J.; Seifert, P.; Stander, N.; Wallace,  J. (1986), “Scelernomic Analysis of Structures Considering Connection Slip,” Finite Elements in Analysis and Design 2, North-Holland, 1986, pp.241-247.

 

 

                         
UCLA Department of Civil and Environmental Engineering     5731/5732 Boelter Hall     405 Hilgard Avenue     Los Angeles, CA  90095-1593
Tel: (310) 825-1346     Fax: (310) 206-2222     E-mail: ceedept@cee.ucla.edu